2x LED Headlight High/Low Beam Bulbs Kit For 2011-2020 Suzuki GSXR 600 & 750

Description

Product Description:
100% brand new and never used
Plug and play, no modification required, simple structure and convenient installation.
Strong thermal conductivity, good heat dissipation,Low power consumption, energy saving and environmental protection, long service life.
Upgrade LED headlights to cope with various harsh environments: fog, rain, snow, night.
Increase the width of the exposure distance to predict the danger in advance.
After an instant start, it starts in 0.1 seconds and the light is on.
Built-in Fans & Ballasts , No Other Fans & Ballasts Required,Smart Efficient Cooling System Fast Heat Dissipation.
Low Voltage Protection, High Precision Constant Current driver Chip
Advantages of LED headlights:
Super bright LED bulb, 4-5 times brighter than traditional bulbs
High power: Each bulb is equipped with 2 high-quality large-scale COB LED chips, each pair of 100W, which can provide 360-degree ultra-bright lighting without blind spots. Continuously emit stable high light output (Brightness up to 14000 Lumen).
Clear vision provides greater protection for travel.
Specification:
Plug type: H7
Voltage: DC 12-24V
Color: 6000K Cold White
Wattage: 50W /Bulb, 100W /Pair
Lumens: 7000LM/Bulb 14000LM/Set(2pcs Bulbs)
Condition: 100% brand new/never used
LED chip: Flip COB Chips.
Material: Aviation 6063 aluminum profile
Working temperature: -40~80℃
Beam Angel: 360 degrees
Service life: >50000 hours
Warranty time: 1 Years
Built-in driver IC: constant current circuit design, long life (internal).
Position on the vehicle: left, right, front
Installation: plug and play.
Purpose: Headlight
Package Included
2 x H7 LED 6000K White Bulbs
Installation note
1. As a safety precaution, please make sure that the car has enough time to cool down properly before starting the installation process.
2. Park the vehicle in the parking lot or make sure it is safely in gear.
3. Be sure to turn off the ignition switch and remove the key.
4. Be careful to avoid burns, especially when turning on or off the vehicle lighting.
5. Be careful not to crush or cut the bulb. Also make sure not to touch the bulb with your fingers, as this will cause blotting.
6. Thoroughly check the connections of contacts, ports, and wires, as incorrect connections can cause lighting problems.
7. When adjusting the bulb, make sure that the end of the bulb does not touch the inner hood of the headlight.