Back up camera mount Jeep Wrangler JK 2007 - 2017 backup rear view spare tire

Description

This Laser-Cut Aluminum rear camera mount is made proudly here in the USA.
Easily attached on your spare tire mount behind your OEM spare tire/wheel using the factory hardware,
this camera mount accepts many popular flush-mount rear view cameras
(not included)
to allow you to experience the convenience and safety of a back-up camera system in your Jeep Wrangler JK.
THIS LISTING IS FOR THE MOUNT ONLY. IT DOES NOT INCLUDE THE CAMERA. I HAVE ANOTHER LISTING THAT INCLUDES THE CAMERA IF YOU WANT TO ORDER BOTH AT THE SAME TIME.
This is a high quality aluminum mount - quality worthy of your Jeep Wrangler.   It's not thin and flimsy plastic like some others on the market.
This is designed to work with nearly all Jeep OEM Wheels/Tires that are mounted on the factory spare tire mount when in its original location.
It may also work with some aftermarket wheels.
You are responsible for fitment with aftermarket wheels or custom set ups.  If you have the 2017 Wrangler Smokey Mountain edition wheels - this mount will require minor modification to work with those particular wheels.
Simply remove your spare tire & wheel, place the mount on the spare tire bracket, replace your spare tire & wheel so that the camera can see out between the spokes of your wheel, tighten up your lug nuts, and you are ready to hook up the camera.
This mount unlike others is adjustable. The top section may be bent to increase or decrease the angle of view, and the plastic pipe may be adjusted to the desired depth using the the two retaining rings.
This mount may also be installed upside down.   All parts are plastic, stainless steel and aluminum and are sourced here in the USA.
This mount is ready to accept any of the popular and inexpensive
1/4" CCD Flush Mount Backup Rear View Cameras
on the market today.
(a camera is NOT included and will need to be purchased separately along with all other necessary items for the installation and activation)
I have used the Gino
flush mounted ¼” camera and it works very well with this bracket.
These cameras can be purchased for around on Ebay or other large internet retailers.
Check my other listing for my kit that includes the camera for a quicker, one stop purchase.
The reverse camera mount will arrive unpainted. The top section that shows through the spare wheel may be easily painted low-gloss black to make it virtually disappear behind your spare tire.
It is recommended that you trial fit your mount and make any adjustments to it prior to painting.
It is recommended that a small amount of clear RTV silicone adhesive be applied around the camera body when installing in the mount to insure a watertight seal.
Be certain to have the camera properly oriented on the mount before securing it with the adhesive. (RTV Silicone adhesive is not included but is inexpensive and available at any hardware store)
Professional installation is recommended.
There are additional parts that you will need to purchase in order to complete a rear camera installation.
This listing is for the rear camera mount only.
Please do your research to determine if this part will work with your application prior to purchase.  A rear camera should never be used as the only method to determine your vehicles surroundings.
Thank you!!!!