CCD Car Trunk Handle Backup Rear view Parking Camera Fit For Audi A3 A4 A5 A6 A8

Description

HOME
ON SALE
+FOLLOW
Car Rear View Reverse Camera Trunk Handle Fit for Audi A3 A4 A5 A6 A8 A6L A8L Avant
Condition:
100% new
Color:
Black
Material:
Plastic
Size:
As picture shows
Video cable length:
approx. 600 cm(236.22 inch)
Power supply cable length:
approx. 100 cm(39.37 inch)
Camera Connection Type:
Wired
Placement on Vehicle:
Rear, Trunk Handle
Image Sensor:
1/3 "OV Color CCD
Pixels:
780(H)X580(V)
Horizontal Resolution:
480 TVL
Minimum Illumination:
1.0Lux F=1.2 (0Lux with IR on)
Night Vision:
5-10meters
Diagonal Viewing Angle:
170 degree optional
Synchronization:
Internal synchronization
Signal to noise ratio:
>48db
Signal System:
NTSC
Electronic Shutter:
Auto
Video Output:
RCA interface, 1.0Vp-p, 75Ohm
White Balance:
Auto
Backlight Compensation:
Auto
Current Consumption:
50-60mA, Max 130mA with IR on
Operating Temperature:
-20 C~ +60 C, RH95% Max
Storage Temperature:
-30 C ~ +80 C, RH95% Max
Waterproof:
IP68
Item included:
1x Car Rear View Camera
1x 6m Camera Video Cable
1x 1m Power Cable
1x User Manual
Compatible With:(For the reference)
fit for Audi A3 A4 A5 A6 A8 A6L A8L Avant
This Is Aftermarket Replacement Item But Not Genuine
Note:
1) All dimensions are measured by hand, there may be small deviations.
2) Color may vary slightly due to the color setting of each individual monitor.
Feature:
1) According to the original factory specifications.
2) Support night vision.
3) CCD imaging sensor.
4) High-definition and wide viewing angle.
5) Unique Design,With reference line functions.
6) Easy to install, you can install the monitor via mount holder or universal bracket.
7) 6m Video cable.
8) Can help avoid incidents and accidents abrasion well.
Install Tips:
1) Take out your trunk handle at the back of your car.
2) Fix the camera to where the trunk handle was.
3) Connect the built-in trunk handle of the camera to where the stock trunk handle was connected to get the power.
4) Connect the power of the camera to your reverse lights - red wire to positive and black wire to negative.
5) Connect the video cable of the camera to the extension cord.
6) Connect the extension cord to your car monitor.
7) You will see the images when your car is in reverse shift.