LED Headlight Bulbs Kit For Yamaha Stratoliner XV1900CT 2006-2009 H7 6000K White

Description

BORVEIT
Authorized Store on eBay
P1 Plus H7 Series Bright White LED Headlight Bulb Conversion Kit
Brand New LED bulbs to replace your old Halogen bulbs.
Brighter light with less power draw than regular Halogen bulbs.
Notes
:
1.Please check whether it is fit your vehicle before purchase.
2.This item is compatible with universal vehicles: Car, SUV, ATV, VAN, Pickup Truck, Bus, Wagon, Motorcycle etc. (Please confirm plug type of your vehicle,Thank you! )
Feature:
1.Perfect heat dissipation design: high quality aluminum housing acts as radiant heat sink, ensure the secure temperature range.
2.High performance LED, superior illumination and stability
3.High power brighter than Halogen headlights or stock lamp
4.Low power consumption
5.Easy installation: plug and play, no need ballast.
6.Environmental-friendly: energy saving, shock-proof and anti-corrosion.
7.Long operation life: Up to 50,000 hours Service Life.
Specification:
1. 100% Brand New & High Quality
2. Type:LED Headlight Bulbs
3. Fit:Universal H7
4. Lumens : 4500LM/Bulb(9000LM/Set)
5. Operation Wattage: 45W/Bulb(90W/Set)
6. Voltage : DC 12V to 24V
7. Lifetime : 50,000 Hours
8. Color Temperature : 6000K White
Beam angle:360 degree
Waterproof:IP68
Operating Temperature: -40~+80 ℃
9.Application: Application: Headlight High Beam / Low Beam
Package Including:
2X H7 LED Headlight Bulbs
Help & Contact:
Question 1: Will these bulbs fit my vehicle?
Answer: These bulbs do fit all vehicles in Compatibility.
These bulbs do fit, as long as your original bulb size is H7.
even if your vehicle does not show up on the compatibility.
Question 2: Warning About Polarity ! Neither bulb lighting up?
Answer: LED Bulbs are polarity sensitive.
Before installation, Please simply plugging the LED bulbs into your vehicle socket to verify the polarity on your vehicle.
If LED bulbs turn on, please proceed to install.
If LED bulbs DO NOT turn on, reverse the polarity and connect again
Installation note
1. As a safety precaution, please make sure that the car has enough time to cool down properly before starting the installation process.
2. Park the vehicle in the parking lot or make sure it is safely in gear.
3. Be sure to turn off the ignition switch and remove the key.
4. Be careful to avoid burns, especially when turning on or off the vehicle lighting.
5. Be careful not to crush or cut the bulb. Also make sure not to touch the bulb with your fingers, as this will cause blotting.
6. Thoroughly check the connections of contacts, ports, and wires, as incorrect connections can cause lighting problems.
7. When adjusting the bulb, make sure that the end of the bulb does not touch the inner hood of the headlight.