-40%

Liquid Urethane Foam, 3 pound Density, 16 lb Kit (1.8 gal)

$ 49.52

Availability: 45 in stock
  • Return shipping will be paid by: Buyer
  • All returns accepted: Returns Accepted
  • Country/Region of Manufacture: United States
  • Condition: New
  • Item must be returned within: 30 Days
  • Refund will be given as: Money Back
  • Restocking Fee: No

    Description

    Overview:
    Overview:
    This two-part liquid, expanding rigid urethane foam is a closed cell, pourable foam, which will resist the absorption of water.
    The densities shown refer to the weight per cubic foot of expanded foam (12" x 12" x 12").
    Once fully cured this foam can be laminated over with any type of polyester, epoxy or vinyl ester resin without melting.
    This product can be poured in multiple layers with excellent bonding between layers.
    All expansion rates and times given are temperature critical. Temperatures below 75 degrees F will lower the expansion rate therefore requiring more foam. Ideal working temperature is 75 to 80 degrees F or above.
    Accurate measuring of these products is extremely critical.
    Find our selection of measuring containers and mixing equipment below.
    Working time before foaming: approx. 45 seconds.
    Time before full expansion: approx. 5 minutes
    The lightweight foam is commonly used for filling voids, filling under decks and practically any other flotation or insulation application. Higher densities are used for architectural castings, support applications and has virtually an unlimited number of potential uses. Click on links below to go to these other items.
    If used for casting always use a mold release and on pourus materials, seal mold and use Mold release.
    Common Applications for 3 pound density Urethane Foam:
    Can be used as a lightweight foam for carving or sculpting as well as some limited casting applications Gives better detail than our 2LB density foam. The 4LB density should be used for better quality castings and improved strength.
    If looking for a liquid foam for sculpting or casting we recommend using at minimum our 3LB or 4LB density.
    Product Information:
    Free Rise Density: 3.0 lbs per cubic ft.
    Expansion Rate: Approx. 20x Liquid Volume
    Buoyancy (flotation): 59 LBs per Cubic Ft.
    *Physical Properties:
    Parallel Compressive Strength: 60 psi
    Tensile Strength: 70 psi
    Shear Strength: 50 psi
    Flexural Strength: 70 psi
    *All physical properties shown above represent typical values and vary based on your application and method of use.
    Coverage and Prices for 3 pound Density Urethane Foam
    Kit Size
    Approx. Coverage
    4 LB Kit (1.7 qts)
    1-1/3 Cubic Feet
    16 lb Kit (1.8 gals)
    5 Cubic Feet
    80 lb Kit (9 gals)
    26 Cubic Feet
    Also Have Liquid Foam With Higher Densities: 2 LB, 3 LB, 4 LB, 8 LB, and 16 LB. Some of these densities can be used for carving, sculpting, casting, filling, and support. The foam is more rigid and heavier as the density increases.
    " Click Here To See Other Sizes And Densities "
    Other Items In My Ebay Store:
    "Click on items to go to them in my store"
    RTV Urethane Molding Rubbers
    RTV Silicone Molding Rubbers
    Urethane Foam
    Polyester and Urethane Casting Resin
    Pigments for plastics and rubbers
    Mold Releases
    Mixing and Measuring Containers
    Stirring Sticks
    " Click Here To Visit My Store "
    >
    Be sure to add me to your
    favorites list
    !
    Powered by
    eBay Turbo Lister
    The free listing tool. List your items fast and easy and manage your active items.